background image

Important safety instructions

PLEASE KEEP THIS MANUAL FOR FUTURE USE

NB! Read all the safety instructions and 
warnings before using your central vacuum 
cleaner.

• This central vacuum cleaner is designed

for vacuuming in dry areas do not use it 
for vacuuming liquid.

• Do not vacuum near smoke, glowing embers,

fire or hot ashes.

• Do not vacuum in areas that may contain

burning or easily flammable liquids and gases. 

• Always pull out the plug before changing the filter or

dust bag, and before servicing.

• When you pull out the plug, pull by the plug,

never pull the cord.

• The outlet and the plug shall be in a clearly visible

place.

• Do not mount the vacuum cleaner into too 

narrow a place. The minimum height of the space 
530mm Width 480mm.

• Do not vacuum sharp objects, such as glass or

needles as they may get stuck in the pipework.

• Do not cover the central unit.

• Always comply with the instructions in this manual.

• The servicing of the vacuum cleaner must only

be carried out by an authorized servicing compa-
ny. Use only spare parts and accessories recom-
mended by the manufacturer. Never try to make 
any alterations into the vacuum cleaner.

• Never use a central vacuum cleaner with a faulty

electrical wire. The central vacuum cleaner has a 
special wire that should always be replaced with 
a wire of the same type. They can be purchased 
at authorised repair shops.

• Remember that the central vacuum cleaner

is not a toy. 

• Never vacuum without a dust bag.

• Always pull out the hose from the suction outlet

after you finish vacuuming.

!

CONTENTS

Safety instructions

The features of the Puzer Easy circuit board

Troubleshooting

Servicing

Using the system

Mounting the central unit

Specifications

Installation of additional suction outlets

2

8

7

6

5

4

3

9

2

Summary of Contents for Easy










Reviews: