USING THE SYSTEM
THE OPERATION PRINCIPLES OF THE CENTRAL
VACUUM CLEANER
When the user is connected to the system by con-
necting the suction hose to the wall outlet, an elec-
tronic signal from the wall outlet is sent to the cent-
ral unit to start the system. The central unit starts,
and the vacuum created by the system causes suc-
tion in the pipings.
The central unit stays on, until the hose is pulled out
from the suction outlet. The vacuum cleaner can be
equipped with a hose featuring a handle switch to
start the vacuum.
1
Vacuuming construction or
gypsum dust or
ashes is strictly forbidden
without a pre-separator.
!
Pre-separator
2
Wealt box
Puzer Central Vacuum Cleaner is easy to use. If
your system includes a suction hose with a handle
switch, push the hose to the suction outlet as in-
dicated by the image (
1
). Now you can start and
stop the system using the switch in the handle of
the suction hose. If you are using a suction hose
without a handle switch feature, the system starts
when you connect the suction hose to the suction
outlet. The central vacuum cleaner is designed for
traditional vacuuming of household dust and litter.
When vacuuming an area that is very dusty or wet,
a pre-separator must be used. (
2
).
5
