MOUNTING THE CENTRAL VACUUM CLEANER
INFORMATION
In case you need any help with planning and installing your central
vacuum system, please contact the dealer or the manufacturer in
the following address.
Manufacturing and marketing:
KP-TEKNO OY
Masalantie 365, 02430 Masala
tel.+358 9 296 5070, fax +358 9 221 5932
e-mail: puzer@puzer.fi, www.puzer.fi
There are detailed instructions on how to mount the Puzer dust piping system and
suction outlets. These instructions are included in your piping system delivery.
1
2
MOUNTING THE CENTRAL UNIT INTO THE WALL BRACKET
The wall rack is installed to the wall by four fastening points.
Use special brackets designed for ingot and gypsum board
walls. Special surface mounting irons are handy when doing
surface and post mounting.
MOUNTING THE CENTRAL UNIT TO THE WALL BRACKET
The central unit is fastened to the wall rack with the hanging
hooks in the machine.
ASSEMBLING THE CENTRAL UNIT
Push the machine to the wall racket supporting with slightly
with your hand and pressing backward.
Check that the hanging hooks of the machine are evenly on
the rubbers of the wall rack. Put the latches of the hanging
hooks to their correct places.
Connect the light connector from the circuit board to the
weak current wire coming from the suction outlet. Fasten the
electric conductor to the circuit board and wall outlet - now the
vacuum cleaner is ready to use.
1
2
3
3
4
