See complete warranty and/or service policy for details
PLATINUM
®
CONDENSING GAS-FIRED WATER HEATER
POLYSHIELD
®
POLYMER-LINED TANK
PVI reserves the right to change
the design and specification
without notice.
PV6801 10/08
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326
▪
(817) 335-9531
▪
www.pvi.com
STANDARD FEATURES AND EQUIPMENT
•
POLYSHIELD
®
polymer-lined tank with 5-year warranty
•
Five-year heat exchanger warranty
•
One-year cost-free service policy
•
Factory authorized startup
•
Up to 94% thermal efficiency
•
Electronic temperature control with LED readout; accurate to
±
1°F
•
Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes
•
100% submerged combustion
•
Heat exchanger ASME stamped for 160 psi operating pressure
•
Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered
•
Nonferrous, removable fittings at all tank connections
•
Fan assisted, pre-mix, stainless steel burner
•
Two safety shut off valves (single body)
•
NOx emission levels compliant with SCAQMD
•
Air proving switch
•
Electronic combustion sequencer and safeguard with pre-purge
•
Operating thermostat
•
Redundant high limits with automatic reset
•
ASME-rated temperature and 150 psi pressure relief valve
•
Drain valve
•
Fiberglass insulated tank
•
Durable, corrosion-resistant, polyethylene jacket
•
Heavy-duty steel stand
•
Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal
•
23"-diameter tank access after heat exchanger removal
•
ASHRAE 90.1 compliant for thermal efficiency and standby loss
•
UL listed for PVC venting material
•
UL listed for zero clearance from combustible walls (non-combustible floor only)
•
UL listed for NSF-5 compliance
•
FM compliant
OPTIONAL FEATURES AND EQUIPMENT
Electronic low water cutoff
Manual-reset, immersion temperature limiting device
Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Water pressure gauge
L.P. gas operation
Condensate neutralization system
CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset
temperature limiting device)
AGA-rated temperature and pressure relief valve
Tridicator (field installed)
Lifting attachments
Other agency compliance _______________________ (consult factory)
