Pro Video Instruments
Vecoax Compact RF series modulator Manual
11
ISDBT
These are the Defaults and
Good starting point for
PLUG
N PLAY
setup.
If you have more than one
unit please ensure you change
the
FREQUENCY
,
KEY ID
, and
SERVICE NAME
so they don’t
overlap and create issues.
•
SOURCE
–
Set your Video Source HDMI,
CVBS, or SDI depending on your model
•
STANDARD
–
Set your TV standard
depending on your needs, location, and
support format of your TV.
•
FREQ
–
Set your Frequency using our
Frequency chart listed at the end of the
manual.
•
VID QUALITY
–
Set the Latency Mode of
your Video.
•
KEY ID
–
This is the number that will be
displayed and stored into the TV
•
SERVICE NAME
–
Name of the Channel you
wish to use. 4-6 Characters max depending
on TV.
•
AUDIO FORMAT
–
Set your desired Audio
Format. AC3 is the Default Standard for ATSC
and QAM mode.
•
ADVANCE
–
Advance options for users who
require Specific PID’s or Fixed EDID
information.
Please don’t change these
unless you understand your required PID’s or
EDID per Cable Provider instructions or PVI
Tech Support request.