Pro Video Instruments
Vecoax Compact RF series modulator Manual
12
DTMB
These are the Defaults and
Good starting point for
PLUG
N PLAY
setup.
If you have more than one
unit please ensure you change
the
FREQUENCY
,
LCN
, and
SERVICE NAME
so they don’t
overlap and create issues.
•
SOURCE
–
Set your Video Source HDMI,
CVBS, or SDI depending on your model
•
STANDARD
–
Set your TV standard
depending on your needs, location, and
support format of your TV.
•
FREQ
–
Set your Frequency here. Because of
the wide range that DTMB covers determine
the Frequencies available. Please search for
these online for your region.
•
VID QUALITY
–
Set the Latency Mode of
your Video.
•
MODE
–
Modulation mode can be set here
depending on your needs for your region
•
LCN
–
logical channel number can be set
here. This is the channel number that will be
stored and displayed on the TV
•
SERVICE NAME
–
Name of the Channel you
wish to use. 4-6 Characters max depending
on TV.
•
AUDIO FORMAT
–
Set your desired Audio
Format. AC3 is the Default Standard for ATSC
and QAM mode.
•
ADVANCE
–
Advance options for users who
require Specific PID’s or Fixed EDID
information.
Please don’t change these
unless you understand your required PID’s or
EDID per Cable Provider instructions or PVI
Tech Support request.
