Pro Video Instruments
Vecoax Compact RF series modulator Manual
20
MY PICTURE LOOKS GREAT UNTIL THERE IS FAST MOTION
–
This could be an
“interlacing,” issue with
the 1080i mode. This happens a lot with
sports. Some TV’s don’t like Interlacing trough the tuner causing “Ghosting.” Change
your HDMI source to 1080P (progressive) or 720P as well as on the unit 1080P Mode ->
Advance options -> 1080P Conversion -> Auto
This will allow the 1080P signal to pass. If your TV tuner does not support 1080P
through the tuner you will not receive any signal or video. If this happens, switch it
back to “Interlacing,” and use 720P
Try changing the
VID QUALITY
settings as well to help with slower Tuners or if using
QAM (J.83B)
switch your
MOD
from
QAM64
to
QAM256
if supported by your TV.
HOW DO I MIXED MY UNIT WITH OTHER DIGITAL SIGNALS
Please refer to the,
“MIXING
SIGNALS WITH OTHERS
,”
in our manual above
MY VIDEO IS STRETCHED OUT ON THE TV
Our unit has a passive HDMI meaning it only encodes what the video is being sent to
the unit. It does not change the color or Aspect ratio of the video to your TV. Please
check your HDMI source or TV aspect Settings.
HOW DO I REPLACE AN OLD MODULATOR WITH THIS ONE
Depending on how your old modulator was set up will determine how you will set
your new unit up. Please refer to your settings of the modulator you are replacing and
copy the settings as best as possible such as Frequencies, Channel Number, Name, etc.
Please refer to the,
“
CUSTOMIZATION SETTINGS
,”
above.
