Pro Video Instruments
VeCOAX MicroMod 3 AV + HDMI RF Modulator Manual
6
WEB INTERFACE CONFIGURATION GUIDE
To log into the web interface: Open an internet browser window on your connected computer and
navigate to the IP address of the unit.
DEFAULT IP ADDRESS: 192.168.0.136
If
the address was changed and you’re unsure what it is
, you can find the address in the onboard
menu, by going to Settings -> Advanced -> IP Settings.
Default User Name: admin
Default Password: admin
Once you have logged into the unit, you will see the SETTINGS page. This will display all your inputs, as
well as your video standard, frequency, and other settings.
On the left-hand side, there is a navigation bar, where you can select different menus for further
configuration.
•
SETTINGS
: Here you can change your broadcast settings for each channel of your unit,
including the broadcast standard and frequency.
•
NETWORK
: Here you can change the IP address, subnet mask, and gateway for accessing the
web interface.
•
UPDATE
: Here you can apply firmware updates to your unit, if directed to do so by PVI
support staff.
•
ABOUT
: Here you can find the unit’s firmware version.
