Remember to save your
settings by selecting
and confirm by pressing
enter
To change the values of the limitation temperatures for a given sensor,
select an appropriate button on the screen and confirm it by pressing
enter
. A
new screen with the temperature limitation value field will appear. To change
the temperature follow the steps of the method described in the previous
items of the instructions, e.g. 6.5 Program editing.
The
Limit
option allows for disabling the LED light power limitation
function based on a temperature sensor in spite of the set temperature
limitation values. By default, both sensors are enabled. To disable this
function, uncheck the field next to the word
Limit
on the screen by pressing
the
enter
button. Then, despite exceeding the pre-set temperature threshold,
power will not be limited and the lamps will not be turned off.
20
Power
Temperature
0
Sensor On
(by default 50 C)
°
Sensor Off
(by default: 80 C)
°
100%
