3
PxAqua 6 LED lamp 12V SH is designed for underwater lighting. It can also be used to illuminate
the interior and exterior architectural details.
The lamp uses six high-power LEDs from OSRAM Oslon. The LEDs are available in 3 different
color temperatures: cold white, warm white or neutral white. The lamp may be provided with
optics of lighting beam angles 10°, 25° (standard), 50° or elliptical 35°x12°. The casing is made of
stainless steel (316L), and provides protection class IP68.
The device is provided with a two-meter cable.
The PX373 may only be powered from 12V or 24V DC using voltage LED drivers or voltage power
supply. In case of using a voltage driver e.g. PX254, PX282 or PX370, it is possible for dimming of
this product.
1. GENERAL DESCRIPTION
2.
SAFETY CONDITIONS
Caution! Before installing, connecting, using and maintaining the lamp, you
must absolutely read this document.
The following symbols are used to emphasise important information on security conditions on the
product and in this manual.
Danger!
Risk of loss of life and
health.
Warning!
Fire hazard.
Warning!
LED light emission.
The risk of eye
damage.
Warning!
The risk of burns.
Warning!
Read this instruction
manual.
Caution!
Do not look at the LEDs at a shorter distance than 2.0 m from the front surface of the
tube without proper eye protection. At a shorter distance, LEDs can cause damage or
eye irritation. Do not look at the light source directly through any optical instruments,
which focus the light rays.
From a distance of more than 2.
2
m from the outer housing of the lamp and LEDs, the
light is harmless to unprotected eyes.
