To set the DMX address:
1. Set the “
Adr
” function.
2. Use the “
next
” or “
previous
” buttons to set the selected DMX address.
3. Push the “
enter
” button to confirm choose.
5.3 Individual DMX address settings
The PX783 module has an option that allows for changing individual
settings. It enables assigning any DMX address to every output channel.
The simplest example of implementation of this function is to control the
lightness of one-color LEDs connected to all outputs. In such case, the same
address must be assigned to all channels so that all outputs are controlled by
one slider on the control panel.
10
ENTER
ENTER
ENTER
NEXT
ENTER
NEXT
NEXT
NEXT
ENTER
ENTER
