6
Cooperating with the PX277 configurator
Lamp settings can be changed by connecting the PX277 configurator
(PxArt+ Settings Controller) to it. It allows in connection with PX800-W to
define the following parameters: DMX addresses for color and brightness
separately (in the range of 1 – 512) and device behavior in the absence of
DMX signal (programmable scene).
When the lamp is connected to the configurator, the PX800-W will restart.
6.1 Available parameters
DMX Addr.
– changing the DMX address of the color temperature and
brightness channel in the range 1 – 512,
No Signal –
behavior of the device when the DMX signal disappears:
•
Scene
– setting the scene displayed when the DMX signal disappears,
•
On
– switching the lamp on at 100%,
•
Off
– complete shutdown of the lamp,
•
Hold
– maintaining the last value of DMX signal,
No Signal Time
– device reaction time after the disappearance of the DMX
signal (0.0 – 10s),
Smooth
– smooth changes in DMX signal value (
OFF
/
Level 1 – 4
),
Control mode
– operating mode selection:
•
2ch DW Basic
– in
DMX Addr.
One DMX address is set and the other is
set automatically next,
•
2ch DW Adv.
– in
DMX Addr.
separate DMX addresses for color and
brightness are set,
10
