FEATURES AND CONTROLS
Phone Jack
Lets you connect a pair of stereo
headphones for private listening
or cueing (monitoring) sound prior
to ÒairingÓ it.
REAR PANEL
PYLE PRO PT-910 Amplifier OwnerÕs Manual Ð 1
FRONT PANEL
Clip Circuit and Indicator
This special circuitry protects
the amplifier and speaker system
from being damaged by
overdriving power levels.
Indicator lights remind the user
to reduce the volume when
amplifier output is execessive.
Illuminated Power
On/Off Lights Up
Protection Indicator
This LED is illuminated when
a thermal overload condition
is present or if a shorted load
occurs on the amplifier
output. The amplifier resets
itself when the problem is
corrected.
Output Power Level LED
Indicators
Indicates the total stereo
output signal level
A/B Speaker Switch
Select the speakers you want to
use with the amplifier in Channel
A, Channel B, or both (for use
with 8 ohm speaker only).
Five Input Sources Mixing Controls
Controls the sound level for each of the
audio input sources
Mic 4 / PHONO Allows you to adjust
volume of connected Mic4 or turntable.
CD/AUX Allows you to adjust volume of
CD or auxiliary sound source.
Feedback Filter
Controls the audio
feedback.
Left / Right Volume
Lets you regulate the sound level of
left and right speakers.
XLR Balanced
Microphone Inputs
Connect up to four
high-impedance
microphones to your
amplifier
Cooling Fan
Cooling system is automatically
activated whenever the
amplifier is turned on. This
forced air cooling system
rapidly exhausts interior heat
to reduced operating
temperature
1/4" Unbalanced Microphone
Inputs
Connect up to four microphones
to your amplifier, via a 1/4"
unbalanced cable, for left and
right mono sound.
1/4" Stereo Input Jacks
Connect stereo input
sources (CD or DVD
player, TV, etc.) here, via
a 1/4"(balanced) audio
cable.
Audio Input Jacks
Connect input sources (CD or
DVD player, TV, etc.) here, via
an unbalanced audio cable.
Match the colors on your cable
connections with the colors on
the jacks.
Fuse
110/220V
Voltage
Selector
Ground Wire
Connection
MIC 4/ PHONO Switch
Select MIC 4 or PHONO
input.
PHONO Input Jacks
Connect your turntable here.
MIX BUS Jack
Connect an extra amplifier if you
have multiple audio sources.
CD/AUX Jack
Connect any high-level sound source
for music or special effects.
Speaker Terminals
Connect two sets of
speakers (Left and
Right, for A and B)
EQ/BYPASS Selector
Select EQ if you are using an
equalizer or BYPASS if you
are not using the jacks.
STEREO/MONO Selector
Select bridged mono input mode in
combination with a mono signal source
plugged into the left channel.
EQ IN/OUT Jacks
Connect an equalizer or other external processor.
