background image

 

 

3

service personnel. 

17. Damage requiring service-Unplug this product from the wall outlet and refer servicing 

to qualified service personnel under the following conditions: 

a.  If the power-supply cord or plug is damaged. 

b.  If liquid or objects have fallen into the product 

c.  If the product has been exposed to rain or water. 

d.  If the product does not operate and you have followed the manual for troubleshooting. 

e.  If the product has been dropped or damaged in any way, and the product exhibits a 

distinct change in performance may indicate a need for service and/or repair. 

18. Replacement parts-If a part needs to be replaced, be sure the service technician has 

used replacement parts specified by the manufacturer or have the same 

characteristics as the original part. Unauthorized substitutions may result in fire, 

electric shock, or other hazards. 

19. Safety check-Upon completion of any service or repairs to this product, ask the 

service technician to perform safety checks to determine that the product is in proper 

operating condition. 

20. Wall of ceiling mounting-The product should be mounted to a wall or ceiling only as 

recommended by the manufacturer. 

21. Heat-The product should be situated away from heat sources such as radiators, heat 

registers, stoves or other products(including amplifiers)that produce heat. 

PRECAUTIONS 

1.  In order to shut off the unit completely, unplug the power cord from the wall outlet, be 

sure to unplug the unit if you do not intend to use it for a long period of time. 

2.  Incorrect use of controls, adjustments and performance other than those specified 

herein may result in hazardous radiation exposure. 

3.  Should this product malfunction, discontinue use and contact a qualified service 

center. 

                                                           

WARNING 

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture

                                                             

CAUTION 

                RISKS OF ELECTRIC SHOCK-DO NOT OPEN! 

            To reduce the risk of electric shock, do not remove casing. 

         No user serviceable parts inside. Refer servicing to qualified service personnel. 

                        The light flash with arrowhead symbol, within an equilateral 

triangle,is intended to alert User to the presence of “dangerous voltage” 

which may be of sufficient magnitude to cause electric shock to persons. 

The exclamation point inside an equilateral triangle is intended to alert User To the 

Presence of important operating and maintenance(servicing)instructions in 

                              The literature that may accompany the appliance. 

         

CAUTION:

 To prevent shock, match wide blade of plug to wide slot, fully inserted 

UL Warning:

 Do not expose the apparatus to dripping or splashing and that no objects 

filled with liquids, such as vases, shall be placed on the apparatus. 

 

Summary of Contents for PVNT7U











Reviews: