12
measure current.
7. Touch the black test probe tip to the negative side
of the circuit. Touch the red test probe tip to the
positive side of the circuit.
8. Apply power to the circuit.
9. Read the current in the display. The display will
indicate the proper decimal point, value and
symbol.
AC CURRENT MEASUREMENT
1. Insert the black test lead plug into the negative
(COM) socket.
2. For current measurements up to 10A, set the
function switch to the A position and insert the red
test lead plug into the (10A) jack.
3. For current measurements up to 400mA, set the
function switch to the mA range and insert the red
test lead banana plug into the (mA) jack.
4. For current measurements up to 10A AC, set the
function switch to the A position and insert the red
test lead banana plug into the 10A jack.
5. Press the MODE button. The measurement mode
Summary of Contents for DT-9918T
Page 1: ...1 V mA A 10A V 10A C F OPERATING INSTRUCTION TRUE RMS AUTORANGING DIGITAL MULTIMETER...
Page 2: ...2...
Page 28: ...28...
