3
the function switch is in the current, resistance, or diode mode.
Doing so can damage the meter.
5.
ALWAYS
discharge filter capacitors in power supplies and
disconnect the power when making resistance or diode tests.
6.
ALWAYS
turn off the power and disconnect the test leads
before opening the doors to replace the fuse or batteries.
7.
NEVER
operate the meter unless the back cover and the
battery and fuse doors are in place and fastened securely.
SAFETY SYMBOLS
This symbol adjacent to another symbol,
terminal or operating device indicates that the
operator must refer to an explanation in the
Operating Instructions to avoid personal injury
or damage to the meter.
This
WARNING
symbol indicates a potentially
hazardous situation, which if not avoided, could
result in death or serious injury.
This
CAUTION
symbol indicates a potentially
hazardous situation, which if not avoided, may
WARNING
CAUTION
