DATE: 30,07,2002
NO.
1
2
3
5
4
7
6
9
8
Dimensions
Weight
Carrier Frequency Range
Power Source
Tone Osc.Frequency
RF Power Output
Spurious Emission
Tatol Harmonic Distortion
Current
ELECTRIC PARAMETER
350g(0.77 lb)
290mm/11.4"
UHF 790-865 Mhz
45dBc
DC
9V
30mA
1%
10mW (TYPE)
32.768KHz
SPECIFICATION
INSTRUTION:
1. After operation the microphone must be switched off as well. Otherwise the batteries will soon be
exhausted. in order to avoid untune consumption of the inner battery: if pilot lamp of the wireless
microphone (1)remains lighted, it means that the battery has no more power: (2)the lamp must
flash only for the time of the switching -on; this indicates that the microphone works well.
When switches the power switch to "on" position, then the power indicator lights, indicate the
apparatus is on.
When switches the power switch to "off"position, then the power indicator lights, indicate the
apparatus is off.
2. INSTALL BATTERY:
PLS. make sure the positive/negative before you replacement batteries.
3. We congratulate you for the choice of this excellent professional apparatus microphone which
will give you outstanding results at the high fidelity. the microphone suit for school speech,
meeting speech, teachers and performer on the stage. to avoid of problem like wireless
microphone.
4. If you want to have a different frequency, set the receiver and transmitter power sw to off before
you do.
FEATURES:
"STAND-BY" funciton.
Steel net based to prevent from rolling.
1
1
O
N
O
F
F
GRILLE HOLDER
SWITCH COVER
SWITCH
POWER LED LIGHT
TUBE
ANTENNA
TESTER: J.H.LIN
GRILLE HOLDER
SWITCH COVER
SWITCH
POWER LED LIGHT
TUBE
2
2
BATTERY INGORMATION:
NOTE:
Make sure the power switch is in the "OFF" position when changing or installing new bat-
tery. Average life on an alkaline battery is 6-8 hours. Be sure to use good quality long life
9V alkaline battery only.
1. This microphone has a 3-level power switch design.
2. In using first turn on the receiver and then the transmitter.
3. New battery the power light is in "OFF".
The light is "ON". It indicates the ba
needs to be replaced.
4. Remember to turn the switch "OFF".
When the microphone is not in use in order to save power. In "STAND
set the switch to the center.
ttery
-BY"
ANTENNA
C
H
C
H
O
N
O
F
F
SPECIFICATION
TRANSMITTER PERFORMANCE SPECIFICATION:
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the use's authority to operate the equipment.
