www.PyleUSA.com
5
2.4G D-INPUT Mode:
Press “
-
” + HOME button for 2 seconds to enter 2.4G search mode,
LED 2 + LED 3 flash when pairing, LED 2 + LED 3 light is on after
successful connection.
2.4G X-INPUT Mode:
Press “
+
” + HOME button for 2 seconds to enter 2.4G search mode,
LED 1 + LED 4 flash when pairing, LED 1 + LED 4 light is on after
successful connection.
2.4G Android Mode:
Press “-” + HOME button for 2 seconds to enter 2.4G search mode:
LED 2 + LED 3 flash when pairing LED 2 + LED 3 light is on after
successful connection.
2.4G PS3 Mode:
Press L + HOME button for 2 seconds to enter 2.4G search mode, four
LEDs flash at the same time, after successful connection, the Switch
automatically distributes controller channel and the corresponding
channel indicator light will always be on.
Remark:
2.4G Dongle is an optional and not standard configuration!
Re-connection Mode
Press the HOME button for 1 second to wake up the controller, and it
will automatically connect to the paired console. It will automatically
sleep if it fails to connect back for 10 seconds, it hasn't wake-up
function when press other buttons.
Charging Indication
When the controller is power off, LED 1 - LED 4 mode indicator light
flashes slowly when charging, and the fully charged LED goes out.
Battery low voltage alarm: indicator light flashes; and indicator
flashes slowly under charging condition, and the indicator light is on
when fully charged.
Automatic sleep/Power on/Power off
The Switch screen is off and the controller automatically sleeps; the
controller automatic sleep (including sensor action) if there is no
keystroke within 5 minutes.
