07
JH-8013/JH8014 Manual
C. Part function
1
Transmitter
、
2
Receiver
、
Rear charging bay of
B
Charging indicator
Working indicator
Charging compartment
Wired state indicator
(Red light)
Wireless signal indicator
(Blue light)
(Bluetooth function button)
CH/MIC
Front charging bay of
B
(only one charging bay for
)
A
(
)
LINE IN
Wired cable jack
(Balance)
BAL
VOL
ON OFF
TONE
MIC IN
Battery case
JH-8013/JH8014 Manual
Power DC 5V
AUDIO IN
OFF/MONO/STEREO
MIC IN
JH-8013A/B
OPTICAL
PAIR
PAIR
JH-8014A/B
Power DC 5V
AUDIO IN
OFF/MONO/STEREO
MIC IN
VOL
TONE
ON
OFF
LIN
E I
N
BAL
MI
C I
N
12
(7) In order not to disturb others, you can reduce the TV volume or change it to
mute.
M
IC I
N
2. Regular hearing aid function
BL-8008
3. Wired headphone with hearing aid function
Note: the transmitter will be in standby status if there is no signal input in
1 minute and then power off automatically in 5 minutes, and its working
indicator will be off. When you turn the audio source on, the transmitter will
work again. Please turn off the transmitter if you don't use it for a long time.
Note: when th
microphone cable is plugged in, the built-in
microphone will be cut off automatically.
e external
(1) Plug the
microphone cable into the MIC IN socket on the receiver.
Place the microphone near the sound source you want to amplify.
then switch it on and adjust the
VOLume, TONE, and BALance to your required levels.
external
(2) The external microphone can be also clipped on a pocket as shown for
general conversation use.
Ensure the
volume on the receiver is set to the lowest,
Plug one end of the wired headphone cable into the LINE IN socket of the
receiver, and connect the other end to the audio source such as a PC, iPAD,
MP3, mobile phone, etc.
, then switch it on and adjust the VOLume, TONE, BALance to your
required levels.
Ensure the volume on the receiver is set to the
lowest
