E-8
CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.
DIGITAL CLOCK FUNCTION
SWITCH UNIT TO "STAND-BY" MODE (DISPLAY LIGHT = DIMMED)
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED IN 2 SITUATIONS:
(1) WHEN THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY
SHOW THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT
IS NORMALLY DIMMED (TO SAVE ELECTRICITY) BUT YOU CAN SWITCH ON
THE BLUE DISPLAY LIGHT BY PRESSING THE "CLOCK SET" KEY OR "TIMER" KEY
ON REMOTE CONTROL. THIS WILL ACTIVATE THE BLUE LIGHT FOR
APPROXIMATELY 10 SECONDS.
(2) WHEN THE SET IS IN "ON MODE" (THE BLUE LIGHT OF THE DISPLAY IS "ON" IN
THIS MODE, TO INDICATE THAT THE SET IS POWERED "ON"). IN THIS SITUATION
THE LCD DISPLAY NORMALLY DOES NOT AUTOMATICALLY SHOW THE CURRENT
TIME. BUT YOU CAN PRESS THE "DISPLAY" KEY (ON REMOTE CONTROL)
TO SEE THE CURRENT TIME.
PRESS & HOLD CLOCK SET KEY UNTIL THE "HH" HOUR DISPLAY IS
FLASHING.
PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT
IN THE DISPLAY & PRESS THE CLOCK SET KEY TO CONFIRM.
HOUR
PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT
IN THE DISPLAY & PRESS
TO CONFIRM.
MINUTE
CLOCK SET
KEY
HOW TO SET CORRECT TIME:
E-7
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS
OFF*
40
MINS
30
MINS
20
MINS
10
MINS
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS
KEY
(ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC
POWER OFF TIME.
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
SLEEP
AUTOMATIC POWER OFF SLEEP FUNCTION
AUTOMATIC POWER ON/OFF TIMER FUNCTION
HOW TO SET TIMER
- THIS SET HAS A TIMER FUNCTION TO ENABLE YOU TO PROGRAM THE UNIT TO
AUTOMATICALLY SWITCH “ON” OR “OFF” AT PRESET TIMES. THIS IS USEFUL AS A MORNING
ALARM CLOCK :
1. PRESS AND HOLD TIMER KEY (ON REMOTE CONTROL). THE
SYMBOL
APPEARS IN THE DISPLAY.
2. PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "ON" TIME
AND THEN PRESS TIMER KEY TO CONFIRM.
3. PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "ON" TIME
AND THEN PRESS TIMER TO CONFIRM.
4. NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW
.
5. PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "OFF" TIME
AND THEN PRESS TIMER TO CONFIRM.
6. PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "OFF" TIME
AND THEN PRESS TIMER TO CONFIRM.
7. NOW THE DISPLAY WILL INDICATE THE "WAKE UP MODE" (iPod OR RADIO OR CD).
PRESS NEXT TO CHOOSE THE DESIRED MODE & PRESS TIMER TO CONFIRM.
8. THE DISPLAY THEN SHOWS THE "WAKE UP VOLUME LEVEL" (LOUDNESS).
PRESS BACK OR NEXT TO DECREASE OR INCREASE THE VOLUME LEVEL TO BE
USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON THE UNIT AT THE
PRE-SET TIME.
9. PRESS TIMER TO CONFIRM.
ON TIME
(NOTE : THE AUTOMATIC ON/OFF TIMER WILL SWITCH ON THE UNIT AS IF YOU HAVE
MANUALLY PRESSED THE “ON/ STANDBY” KEY. IF YOU HAVE SELECTED "WAKE TO RADIO",
THE EXACT PRESET RADIO BAND & STATION WILL BECOME ACTIVATED WHEN POWER
SWITCHES ON).
10. FINALLY THE UNIT WILL RETURN TO THE NORMAL DISPLAY, EXCEPT THAT THE
SYMBOL WILL BE SHOWN, TO INDICATE THAT YOU HAVE PROGRAMMED A ON/OFF ALARM
SETTING.
11. IN CASE YOU WISH TO DISABLE THE TIMER, PRESS THE
TIMER KEY ONCE,
& THE
SYMBOL WILL DISAPPEARS.
OFF TIME
TIMER
TIMER
