①
IR sensor
②
Laser pointer beam
③
LCD Display
④ ℉
/
℃
select key
⑤
Backlight select key
⑥
Laser select key
⑦
Measurement Trigger
8
Battery Cover
4.
4.
4.
4.
INDICATOR
INDICATOR
INDICATOR
INDICATOR
①
Digital readout
②
Temperature
℃
(Celsius)
③
Temperature
℉
(Fahrenheit)
④
Data Hold
⑤
Measuring indication
⑥
LOW battery indicator
⑦
Laser Point
8
Fixed emissivity (0.95)
9
Max Min
5.
5.
5.
5.
MEASURMENT
MEASURMENT
MEASURMENT
MEASURMENT OPERATION
OPERATION
OPERATION
OPERATION
①
Hold the meter by its
Handle
Handle
Handle
Handle Grip
Grip
Grip
Grip
and point it toward the surface to be measured.
②
Pull and hold the
Trigger
Trigger
Trigger
Trigger
to turn the meter on and begin testing. The display will light if
the battery is good. Replace the battery if the display does not light.
③
While measuring, the SCAN display icon will appear in the upper left hand corner of the
LCD.
④
While continuing to pull the Trigger:
a.
Push the
Laser
Laser
Laser
Laser
button to turn on the laser pointer. When the laser is on the
laser icon
will appear on the LCD over the temperature. Aim the red
beam approximately a half inch above the point of test (pressing the Laser
button again turns the laser off).
b.
Select the temperature units (
o
C or
o
F) using the
o
o
o
o
C
C
C
C
and
o
o
o
o
F
F
F
F
buttons.
c.
Push the
Backlight
Backlight
Backlight
Backlight
key to turn on the LCD backlighting function.
⑤
Release the Trigger and the HOLD display icon will appear on the LCD indicating that
the reading is being held.
⑥
The meter will automatically power down after approximately 7 seconds after the trigger
is released.
Note:
Note:
Note:
Note: Measurement
Measurement
Measurement
Measurement considerations
considerations
considerations
considerations
Holding the meter by its handle, point the IR Sensor toward the object whose temperature is
to be measured. The meter automatically compensates for temperature deviations from
ambient temperature. Keep in mind that it will take up to 30 minutes to adjust to wide ambient
