0$,181,7²5$',223(5$7,21
BAND SELECTION
At radio mode, repeatedly pressing
BND (7)
to select the desired band in the following
orders: > FM1 > FM2 > FM3 > AM1(MW1) > AM2(MW2) >
AUTO MEMORY STORE
At radio mode, press
APS (9)
for 2 seconds to start searching from the current frequency
and storing the strongest signal stations into the corresponding preset station number
1 – 6
(12)
. The searching will stop until one cycle search is finished.
AUTO MEMORY SCAN
At radio mode, press
APS (9)
shortly to scan all the preset stations on the selected radio
band and stop for several seconds on each preset station scanned. During scanning, press
APS (9)
again to stop this scanning and the current radio station will be broadcasted.
AUTOMATIC SEEK UP/DOWN
At radio mode press
ŹŹű
/
ŲŻŻ
(11)
for automatic seeking the frequency upward or
downward to the next strong station received. By pressing the preset number
1 – 6 (12)
for
two seconds can store the station on the respective preset number.
MANUAL TUNING UP/DOWN
At radio mode, press
ŹŹű
/
ŲŻŻ
(11)
for two seconds to activate the manual tuning mode
and the word “MANUAL” will show in the
LCD DISPLAY (5)
shortly. At manual tuning mode,
press
ŹŹű
/
ŲŻŻ
(11)
repeatedly
to tune the radio frequency upward or downward to your
desired frequency. When a radio station signal is received, pressing the preset number
1 –
6 (12)
for 2 seconds can store the station on the respective preset number. In case the
manual tuning mode has not been operated for 5 seconds, it will resume to automatic mode
and the word “AUTO” will appear shortly in the LCD display.
PRESET MEMORY
At radio mode, press any one of the preset number
1 – 6 (12)
to select a station which had
been stored in the memory. Press any one of the preset number
1 – 6 (12)
for two seconds
can store the current broadcasting station in the memory. This unit can store up to 30
stations (FM1 x 6, FM2 x 6, FM3 x 6, AM1 x 6, AM2 x 6).
MONO / STEREO CONTROL
At radio mode, press
MO/ST (8)
to select FM reception in stereo or mono mode.
9
