- 11 -
BLUETOOTH OPERATION
Pair and Connect
Prior to using the Bluetooth device as a hands-free system for a Bluetooth-enabled mobile phone for the
first time, you must pair and connect the two devices as follows:
1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no device is
connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone
finds
the car audio system, the “PYLE” name will be displayed.
3. Choose the “PYLE” from the device list to pair and connect with the car audio system. Upon confirming,
the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car audio system
whenever a call is made or received, or when the mobile phone plays music.
Make a Call
•
To make a call, dial the call directly from the paired mobile phone.
•
To make a call with this bluetooth hands-free system:
a) When linking up the Bluetooth-enabled mobile phone to this bluetooth hands-free system, press the
button to access the dial telephone number mode, then press the “0~9”, * and # button on remote
control to input the telephone number, and the entered number will be shown on the LCD display.
b) If a number has been incorrectly inputted, press the
DEL
button or button to delete it.
c) Press the button to make outgoing call.
Redial Last Dialed Number
Press and hold the button on the control panel to redial the last dialed phone number.
Answer a Call
•
When the mobile phone is called, the incoming telephone number displays on the LCD.
•
To receive the call, press the button on the control panel.
Reject a Call
To reject the call, press the button on the control panel.
End a Call
To end an active call, press the button.
Switch Audio Between Car Audio and Mobile Phone
During a call, press the
VOL
knob/button to switch the audio source from the car audio system back to your
mobile phone.
Adjust Talk Volume
•
During a call, use
VOL
knob or
VOL+
/
VOL-
button to adjust the volume level.
•
Use the
MUT
E button to mute sound.
Audio Streaming (A2DP)
1. Press the /
MODE
button to enter BT mode and display
pause
in the LCD display.
2. When a mobile device is paired, music played through that device will automatically be heard through the
car audio system.
3. Press the or button to play the next or previous on the mobile phone.
4. Press the button to pause or resume music playback.
