Video mode
3
Instructions for Use
1.
Turn off car engine.
2.
Insert TF card to Micro SD slot. Note: Pls use high speed TF card (Class 6 or above), and capacity not less
than 512MB. The Micro SD slot supports TF card up to 32GB.
3.
Fix the DVR to car original rearview mirror.
4.
Plug car charger into car cigarette lighter.
5.
Connect charge extension cable with car charger and insert to DVR DC5V jack.
6.
Start the engine, DVR will turn on automatically and start recording. When recording, recording light and
charging indicator keep flashing (charging indicator will stop flashing after charge fully).
7.
When it is recording, other buttons have no function. Press POWER/OK button to stop recording and then
other buttons will have function.
Channel:
Channel 1, channel 2 and dual channels. Choose channel 1, front camera will work. Choose channel 2,
back camera will work. Choose dual channels, both cameras will work.
Exposure:
Can choose the exposure parameter when recording or taking pictures.
White Balance:
Auto, Daylight, Clear, Cloudy, Fluorescent, Incandescent
Loop recording:
Can set the time of loop recording: 3 Minutes, 5 Minutes, 10 Minutes.
Motion Detection:
Off/On. This DVR is built-in acceleration sensor, which can detect sudden change of
acceleration(collision or emergency braking), and instantly trigger recording before accident happened.
Record Audio:
Voice recording Off/On.
Gsensor:
In video mode, G-sensor automatically boots to save the permanent files which will not be
overwritten or deleted when loop recording. Off/High/Medium/Low for different environment.
