Pyle PLDVRCAM44, User Manual

www.PyleUSA.com

5

     objects in the screen for 5 seconds, the car DVR will stop     

     recording. If you need to exit the motion detection mode,    

     long press “

MENU

” button for 3 seconds to exit in standby  

     mode.

7. Collision Sensor Function

     Built-in crash sensors (G-sensor). If there is a vehicle 

     collision, the camera will lock current video file on the     

     accident happened 10 seconds before and after data. Also  

     there is locked icon shown on the lower left of the screen.     

     The locked file won’t be overwritten by loop recording.

    (The sensitivity of the G-sensor can be adjusted according     

     to using condition.)

8. One Key Lock Function

     The car DVR has one key lock function, during recording,     

     you can short press the Mode button to lock current video  

     file which you want to preserve and will not be covered by  

     loop recording.

9. Date and Time Setting

     In standby, short press the “

MENU

” button to enter the     

     system setup menu. Short press “up /down” button move      

     to the “Clock Setting” option. Short press “OK” to go into       

     the menu settings.

Attention:

 In order to keep ensured record evidence of 

accident date and time, please set the correct time before 

using the car DVR.