background image

www.PyleUSA.com

6

5. <MIC> Button

FUNCTION 1: PAGE DOWN

In the menu setting and playback modes, you can press the 

<Down> button to page down.

FUNCTION 2: FAST FORWARD

In playback state, press the <MIC> button to enter the fast 

forward mode.

FUNCTION 3: MODE SWITCHING

In standby  state, press the <MIC> to  enter the photograpy  

mode, and press the <MIC> again to enter the playback 

mode.  On the playback interface, you can page up/down and 

press the <OK> to select the desired file.

FUNCTION 4: DISABLE THE AUDIO-RECORDING FUNCTION

In recording mode, press the <MIC> button to disable the 

audio-recording function. Then, the MIC indicator is turned 

off. Press the <MIC> button  again to enable the audio 

-recording function. Then, the MIC indicator is turned on.

6. <Reset> Button

If the DASHCAM is crashed, press the <Reset> button to 

power off the DASHCAM.

INSTALLATION

1. Fixing the camera to the window mount 

    It is compulsory for window mount to be fixed up before     

    using the device in the car. Make sure that you place the  

    recorder in an appropriate place, so as not to obstruct the  

    driver’s view.

2. Connecting charger to the cigarette lighter 

     Connect only the manufacturer-approved charger supplied     

     with your device. Use only approved charger specifically  

     designed for your device. Incompatible charger can cause  

     serious injuries or damage to your device. 

Summary of Contents for PLDVRCAM71











Reviews: