www.PyleUSA.com
7
3. Inserting a memory card
You have to insert a memory card before you can start
recording. The recorder supports Micro SD cards with up to
32GB capacity. You are advised to use a Class 10 memory
card with at least 8GB capacity. DO NOT insert or remove
the memory card when operating the device.
OPERATION GUIDE
I. Installing the DASHCAM
1. Power off the automobile engine.
2. Insert the Memory card into the Memory card slot.
NOTE:
a. The 1080P format is adopted for the video-recording
function, and large amount of data will be generated for
the video-recording function. To prevent system crash, you
are recommended to use well-branded high-speed TF card
(Class 10) with a capacity of at least 4 GB. The Memory card
supports a maximum capacity of 32 GB.
b. The data recorder does not support hot plugging of the
Memory card. Be sure to remove the Memory card after
powering off the data recorder.
3. Secure the DASHCAM to the front windshield of the
automobile.
NOTE:
Mount the DASHCAM in a safe place with ample light.
Preferably, the DASHCAM should be mounted on both sides
of the rearview mirror. Before pasting and mounting the
DASHCAM, clear the impurities and moisture in the pasting
position by using a clean and soft cloth.
4. Fix the power cable properly by using the cable slot and
cable clip, preventing the line of sight from being affected.
5. Insert the in-vehicle charger into the cigar lighter of the
automobile.
