Pyle PLDVRCAM71, User Manual

www.PyleUSA.com

8

6. Insert the charging interface of the in-vehicle charger into  

    the USB interface the data recorder.

7. Adjust the angle of the data recorder, ensuring that the   

    camera lens keeps level with the ground.

8. Start up the engine and check whether the DASHCAM is  

    mounted properly.

II. Function Description

1. Automatic Recording

    After you start up the automobile engine, the DASHCAM  

    will automatically start and recording function will be    

    enabled. In addition, the system indicator and power    

    indicator are turned on, and the REC indicator on the screen  

    blinks. After you turn off the automobile engine, the 

    DASHCAM saves the recorded content automatically and  

    will be powered off. The recorded images are saved  

    segment by segment in the Memory card. When the       

    Memory card saved images is at full capacity, the data      

    recorder overwrites the early recorded images.

NOTE:

 You can set the time period of recording in the menu. 

The time period can be set to 1 minute, 3 minutes, and 5 

minutes. The default time period is 3 minutes.

2. Manual Recording

    Press the <Power> button, the DASHCAM is powered on  

    and begins to record data automatically. Press and hold the  

    <Power> button for 5 seconds, and then the DASHCAM  

    saves the recording data automatically and is powered off.

3. Photography Function

     In standby state, press the <MIC> button to enter the    

     photography mode. Then, the icon in the upper left of the  

     screen is changed from a video camera to a still camera.