www.PyleUSA.com
12
SYSTEM SETTINGS
Date/ Time Setup
Use the following procedure to change the device’s time and date:
1. Press
MENU
twice to enter System Settings
2. Press the
DOWN
button to navigate to the "
Date/Time
" option
3. Press
OK
to view date/time in the format:
YYYY/MM/DD HH:MM:SS
4. Press the
UP
or
DOWN
button to change the highlighted number.
5. Press
OK
to move to the next date/time segment and repeat step 4.
6. Press
OK
again to confirm your entry.
7. Press
MENU
to exit System Settings.
Note:
If the battery remains fully discharged or is removed from the
device, the time and date will be reset.
Auto Power Off
When enabled, this option allows the device to shut down automatically
if Recording Mode is not engaged.
1. Press
MENU
twice to enter Setup
2. Press the
UP
or
DOWN
button to navigate to the "
Auto Power Off
"
option
3. Press
OK
to view the current selection:
3min/5min/10min/OFF
4. Press the
UP
or
DOWN
button to make your selection
5. Press
OK
to confirm your entry
Beep Sound
This setting allows you to turn the device's button sound effect on or off.
1. Press
MENU
twice to enter Setup
2. Press the
UP
or
DOWN
button to navigate to the "
Beep Sound
" option
3. Press
OK
to view the current
ON/OFF
status for this feature
4. Press the
UP
or
DOWN
button to enable or disable this feature
5. Press
OK
to confirm your entry
