www.PyleUSA.com
3
Work with OBS
Select Device
Video Setting
You should get the video in window. If you want to set the video resolution,
click the drop-down box next to
Resolution/FPS Type
and select Custom, then
click the drop-down box next
Resolution
to select one resolution.
After you set the resolution to 3840 x 2160, and you change the video source,
and the resolution of video source is smaller than 3840 x 2160, such as 1920 x
1080, the software will not display the video and you will see
Check Resolutions
Settings
on the window.
Now you need to set resolution to 1920 x 1080 or smaller resolution, then you
will see the video on the window.
If resolutions of video source and device output are 3840 x 2160, you may find
that the viewing picture is way out of the frame of OBS. Right click image window
of OBS, select
Resize output (source size)
, and you will get the whole picture.
You can click the drop-down box next to
FPS
to select the appropriate FPS -
30,
60, Highest FPS,
or
Match Output FPS
, and click the drop-down box next to
Video Format
to select the video format -
XRGB, NV12,
or
YUY2
.
After download and installation, double click
OBS Studio
icon on desktop to run OBS.
Click icon + under
Sources
window at the
bottom left of OSB panel, and select
Video
Capture Device
. Click
OK
in the new pop-up
window. You also can insert a name you want
to create for the device.
One window will appear you after above.
Please click the drop-down box next to
Device
and select
Pyle CameraLink PLINK2
.
