5
INSTALLATION
Hook
Screw
Dashboard or Console
Side View showing
T, N
Screw
To fasten the unit to the factory radio
mounting brackets.
1. Use a screwdriver to loose the hook’s
screws on the front left and right sides
of the unit and remove the hooks.
2. Align the screw holes on the bracket
with the screw holes on the unit, and
then tighten the screws (5x5mm) on
each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
Summary of Contents for PLMR87WB
Page 6: ...6 WIRING CONNECTION...
