www.PyleUSA.com
6
www.PyleUSA.com
7
Troubleshooting
If you experience operation or performance problems with this product, compare your
installation with the electrical wiring diagram on the previous pages. If problems persist,
read the following troubleshooting tips which may help eliminate the problems.
Features:
•
10" Slim Woofer
•
Low-Level RCA Input
•
High-Level Speaker Line Input
•
Blue LED Power Status Indicator
•
Red LED Protection Status Indicator
•
Remote Bass Boost Level Control
•
Delay Remote Turn-On Thermal
•
Short and Overload Protection Circuits
What's in the Box:
•
Amplified Subwoofer
•
Remote Subwoofer Level Control
•
Remote Subwoofer Control Cable
•
Hi-level Input Wire
•
Mounting Hardware
Technical Specs:
•
Phase Shift Switch: 0 or 180°
•
Adjustable Input Sensitivity: 0.12V-3.5V
•
0 to +12dB Variable Bass Boost (@50Hz)
•
Low Pass Filter (50-150 Hz)
•
Fuse: 1x25A
•
Max Power: 900 watt
•
RMS Power: Amplifier: 100Watt
•
Slim woofer: 150Watt
•
Product Dimension: 14.2" x 11.2" x 3" -inches
PROBLEM
POSSIBLE REASON
SOLUTION
Not switching on. Power
LED not ‘on’
No sound
Not working, but status
LED ‘on’
NO +12v to power wire
Check fuses and connections to battery.
NO power to remote wire
Fuse broken
Fuse blown
Check remote on connections to head unit.
Replace fuse with correct type and amperage.
Replace fuse with correct type and amperage.
Head Unit
Gain control not set up
Connections
Move unit to vented area. Turn head unit down.
Check head unit volume level.
control
Check all power, remote on and ground
connections
