Pyle PMSA126BU, User Manual

www.PyleUSA.com

3

14. Before placing, installing, rigging, or suspending any product, inspect all 
       hardware, suspension, cabinets, transducers, brackets and associated equipment  
       for damage. Any missing, corroded, deformed, or non-load rated component  
       could significantly reduce the strength of the installation, placement or array.  
       Any such condition severely reduces the safety of the installation and should be
       immediately corrected. Use only hardware which is rated for the loading 
       conditions of the installation and any possible short-term, unexpected 
       overloading. Never exceed the rating of the hardware or equipment. 
15. Consult a licensed, professional engineer regarding physical equipment 
       installation. Ensure that all local, state and national Regulations regarding the  
       safety and operation of equipment are understood and adhered to. 
16. Refer all servicing to qualified service personnel. Servicing is required when the  
       apparatus has been damaged in any way, such as power supply cord or plug is  
       damaged, liquid has been spilled or objects have fallen into the apparatus, the  
       apparatus has been exposed to rain or moisture, does not operate normally, or  
       has been dropped. 

Introduction

To get the most from our PMSA126BU, it is recommended that you review all of the 
information provided in the instruction manual before operating the equipment. 

FRONT & BACK PANEL