background image

Ohm of Pair

Number of Pair

= Total ohm

Four 8 ohm speaker

16ohm

2

= 8ohm

www.PyleUSA.com

8

SYSTEM 4: Four Speakers in series and Parallel

NOTE: 

Although the description above is for connecting two series pairs of 8 Ohms 

speakers in a parallel hook up, you many also select to combine a series pair and a 

parallel pair in a parallel hook up, simply be sure you have calculated the total 

impedance, and attach the speaker (+) circuit wire to the proper amp terminal.

SYSTEM 5: Connecting Speakers with transformers

NOTE: 

When the 70V or 100V constant line voltages are used, a line matching 

transformer must be used with each speaker, all transformers must be connected in 

parallel, never connect line transformers in series.

Remote control

1. Press this button to turn 

ON

 or 

OFF

 the MP3

2. When in the FM mode, press this two buttons 

     to select previous or next channel.

3. Press these two buttons to select the previous

    or next track in USB or SD or Bluetooth mode

4. Volume up or down 

5. Press the numbers to select the tracks directly. 

     The unit takes 1-2 seconds to response in 

     USB or SD mode.

6.  Press this button to repeat mode.

7.  Press this button to select the playing mode, 

     such as USB/SD/FM/BLUETOOTH

8.  EQ function, if the mp3 with EQ 

9.  Play and Pause function for MP3

FOUR SPEAKERS IN SERIES/PARALLE COMBINATION

Summary of Contents for PMSA126BU











Reviews: