background image

-8-

Thank you for choosing our product

Thank you for choosing our product

This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.

CAUTION

INSTALLATION GUIDE

This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.

!

.

Warning

Item No.:PSW772

Item No.:PSW772

TV size range: 42

65

Maximum weight capacity: 50 kg /110lbs

Adjustable angle: 0

12

"

"

°

°

Part 5-Adjusting display and using cord management

Route cords along articulating arms using cord management

s(7).

Articulating arms can be adjusted to position display into desired location.
Use wrench to tighten and loosen the tension screw. Do not overtighten
and do not loosen to the point the screws come out.

clip

Part 5-Adjusting display and using cord management

8

9

7

www pyleaudio com

.

.

MADE IN CHINA

P yle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000

Summary of Contents for PSW772

Page 1: ...ssional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount and the display otherwise the structure must be reinforced 3 Safety gear and proper tools must be used A minimum of two people are required for this installation Failure to use safety gear can result in property damage serious injury or death Warning Item No PSW772 Item No...

Page 2: ...hook over the bottom of mount Then put safety bolts into the bottom of the brackets and lock it Part 3 Hanging display 2 3 1 5 6 7 8 9 4 4 4 4 I J K L M Square washer Long bolt Wall anchor Long bolt washer Spacer ID Description 1 2 A 3 4 B C Wall plate M4 mm 12 bolt M4 mm 16 bolt M5 mm 16 bolt M6 mm 16 bolt M8 16mm bolt M 36mm 5 bolt M6 36mm bolt M 36mm 8 bolt D 4 4 4 4 4 E F G H ID Description Qt...

Page 3: ...ews four square washers I and four spacers M at the top and bottom of each bracket Tighten screws firmly Do not overtighten Part 2b Attaching brackets to screen with recessed back Part 1a Wood Stud Mounting Use wall plate 1 as a template make sure it is level and mark mounting holes along the center lines of the wood studs Drill six 3 16 six 5mm dia holes 2 50mm deep Level wall plate 1 and attach ...

Page 4: ... 2 50mm Φ3 8 10mm Concrete Wall K L I A E J Square washer I Small hole for M4 screws Medium hole for M5 and M6 screws Large hole for M8 screws Part 2a Attaching Brackets To Screen With Flat Back Center brackets vertically on back of screen Select the small A or B medium C or D or large E screws Attach brackets to screen using four selected screws and four square washers I at the top and bottom of ...

Reviews: