Pyle PTED01, Manual

Setting up

3

PHONES        KICK           HI  HAT                 USB                       12V

Note: we suggest to use the alkaline 
          batteries.

Power Supply

Using Headphones

Your d

igital drum

 will run on either batteries or power adaptor. Follow the instructions below according to 

Using an AC- Adaptor

Using Batteries

Power will be automatically drawn from the  AC  adaptor  
if an optional AC adaptor is connected while batteries are 
installed in the instrument. 

It is recommended that you replace worn batteries as soon  

as possible. When battery voltage drops, the display will dim  

and / or the sound will become distorted,   when this occurs, 

replace the batteries with a complete set of six new  batteries

of the same type.

NEVER mix old and new batteries, different types of batteries

(alkaline, magnesium, etc.), Batteries by different makers, 
or batteries from the same maker but of different types.
Misuse may cause the instrument to become hot, result in 
fire, or battery leakage.

Also, to prevent damage due to battery leakage, remove 
all the batteries from the instrument when it is not to be 
used for an extended period of time. 
Batteries left in an unused instrument will also loose their

power overtime.

        Turn off the power on all equipment before 
making any connections.

Do not use adaptors other than the one specified.
The technical specification of the adaptor is DC 12V
output, center positive type.