www.PyleUSA.com
11
1. In voice mode, press [Page] button to enter the voice volume adjustment
(the screen will show [L- -]). Press [+/-] button to adjust the voice volume of the
pad you are playing (range 0-32)
2. This change will automatically save until the Drum Kit is switched off.
To permanently save this setting to a user drum kit please refer to the “
Saving
Adjustments”
.
3. Adjust Voice Pan
1. In voice mode, press [Page] button again to enter the voice pan adjustment
(the screen will show [P- -]).
2. Press [+/-] button to adjust the voice pan of the pad you are playing (range -8
Left, +8 Right).
This change will automatically save until the module is switched off.
To permanently save this setting to a user drum kit please refer to the “
Saving
Adjustments”
.
SAVING ADJUSTMENTS
When you are happy with your adjustments, press and hold the [SETUP] button.
The screen will flash U01, you can now select which user preset you would like to
save your new drum settings to. Use [+/-] buttons to select U01 or U02 and press
the [SETUP] button again to save your adjustments. Your User kit will will now be
permanently stored on the module.