www.PyleUSA.com
2
CONGRATULATIONS!
Thank you for purchasing this digital drum set. The drum set has been
developed to act and play like a drum set but with greater ease.
Before you use the instrument, we recommend you to read through
this manual.
Location
•
To avoid deformation, discoloration,
or more serious damage, do not expose
the unit to direct sunlight, high
temperature sources, or excessive
humidity.
•
Direct sunlight.
•
High temperature (near a heat source,
or in car during the day time).
•
Disconnect all cables before moving
Power Supply
•
Use the specified adapter only. Using
the wrong adapter can result in damage
to the instrument or overheating.
•
Turn the power switch OFF when the
instrument is not in use.
•
Remove the electric plug from the
outlet when the instrument is not to
be used for extended periods of time,
or during electrical storms.
•
Avoid plugging the AC adaptor into
an AC outlet that is also powering
high-consumption appliances such as
electric heaters or televisions.
Also avoid usingmulti plug adaptors
since these can reduce sound quality,
cause operation errors and result in
possible damage.
Turn Power OFF When Making
Connections
•
To avoid damage, turn OFF the power
switch and all related devices prior to
connecting or disconnecting cables.
Handling and Transport
•
Never apply excessive force to controls,
connectors, and other part
•
Unplug cables by gripping the plug
firmly. Do not pull on the cable.
•
Disconnect all cables before moving
the instrument.
•
Physical shocks caused by dropping,
bumping, or placing heavy objects on
the instrument can result in scratches
and more serious damage.
Cleaning
•
Clean the module with a dry, soft cloth.
•
A slightly damp cloth may be used to
remove stubborn grime and dirt.
•
Never use cleaners such as alcohol or
thinner.
•
To avoid discoloration, do not place
vinyl objects on top of the instrument.
Electrical Interference
•
This instrument contains digital
circuitry and may cause interference
if placed too close to radio or television
receivers. If this occurs, move the
instrument further away from the
affected equipment.
