www.PyleUSA.com
4
ASSEMBLY
1. Loosen frame bracket bolts with supplied drum key, and open the drum stand
as shown below. Tighten bolts to secure once the stand is set into the position
pictured. (Do not over tighten)
2. Loosen pad bracket bolts and insert pads and module as shown below, tighten
bolts to secure. (Do not over tighten) Remove cymbal top nut and lower cymbal
onto holder, re-install nut to secure cymbal.
PTEDK50
CRASH
HI- HAT
SNARE
TOM1 TOM2
RIDE
TOM3