LOCATION OF CONTROLS
1) DUST
COVER
2) DIAL
POINTER
3) LEFT
SPEAKER
4) PLAY/PAUSE/STOP
BUTTON
5) SKIP
DOWN
BUTTON
6) SOURCE
BUTTON
7) RECORD BUTTON
8) POWER OFF/FUNCTIONS SELECTOR
9) VOLUME UP/DOWN CONTROL KNOB
10) 3.5 MM HEADPHONE JACK
11) SD/MMC CARD SLOT
12) USB SOCKET
13) LCD DISPLAY
14) RIGHT SPEAKER
15) SKIP UP
BUTTON
16) +10 BUTTON
17) REPEAT/INTRO/RANDOM BUTTON
18) RADIO BAND SELECTOR
19) TUNING KNOB
20) X-BASS ON/OFF BUTTON
21) POWER LED INDICATOR
22) FM STEREO LED INDICATOR
23) REMOTE SENSOR
24) SPINDLE ADAPTOR
25) TURNTABLE SPEED SELECTOR
26) PICK-UP HOLDER
27) LINE OUT SOCKET
28) FM WIRE ANTENNA
29) AUTO STOP ON/OFF SWITCH
30) AC POWER CORD
31) 3.5MM AUX IN JACK
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD (30) TO AC OUTLET
2. SWITCH THE FUNCTION SELECTOR (8) TO “ PHONO OR USB/SD “ FUNCTION. IF THE BACKLIGHT AT LCD
DISPLAY IS LIGHT UP. IT’S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO
PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1. TURN FUNCTION SELECTOR (8) TO SELECT “ TUNER ” MODE.
2. SELECT THE DESIRED BAND BY RADIO BAND SELECTOR (18) (AM OR FM OR FM-STEREO).
3. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (19).
4. ADJUST VOLUME KNOB (9) TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE RADIO BAND SELECTOR (18) AT “ FM ” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE.
IN PARTICULAR WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN
MONO.
E-1
