REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NOFILE “ IS BEING DISPLAYED” ON
LCD DISPLAY (13).
- THE LCD DISPLAY (13) SUPPORT ENGLISH LANGUAGE ONLY
MP3 TRACK FORMAT REQUIREMENT:-
-
MP3 BIT RATE : 128 KBPS.
-
THE PERFORMANCE OF PLAYING MP3
FILE
IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
REPEAT/INTRO/RANDOM MODE (BY REMOTE HANDSET)
PRESS THE REPEAT/INTRO/RANDOM BUTTON BEFORE OR DURING PLAYBACK,
A SINGLE TRACK, OR ALL
THE TRACKS
CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
(1) REPEAT 1
(2) REPEAT ALL TRACK
(3) INTRO PLAY
(4) RANDOM
(5) OFF
MODE
INDICATOR
PLAY
MODE ON
LCD
DISPLAY
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
ALL
INTRO PLAY MODE
INTRO
RANDOM MODE
RANDOM
OFF
MODE
-----------------
REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
INTRO PLAY
YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK IN A CD BY THIS FUNCTION & SAVING
YOUR TIME TO SEARCH THE DESIRE SONG
RANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
TRACKS PROGRAMMING (BY REMOTE CONTROL)
UP TO
10
TRACKS CAN BE PROGRAMMED FOR MP3 FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE
THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:-
1. SET IN USB/SD MODE & SET AT STOP MODE.
2. PRESS THE “PROGRAM” BUTTON, “ PROG “ WILL APPEAR ON LCD DISPLAY (13). MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP
(15)
OR DOWN
BUTTONS (5).
4. PRESS THE “ PROGRAM ” BUTTON TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD “ PLAY/PAUSE/STOP ”
BUTTON (4) TO PLAY THE DISC IN ASSIGNED ORDER.
7.
TO CANCEL THE PROGRAMMED FILE, STOP PLAYBACK THE UNIT AND THEN PRESS “PROGRAM”
BUTTON ON REMOTE HANDSET UNTIL “ PROG “ IS DISAPPEAR ON LCD DISPLAY (13).
ENCODING OF CD/PHONO INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE THE PHONO TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH
USB CONNECTING PORT OR SD/MMC CARD.
A) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO “ PHONO “ MODE AND THEN PRESS THE “
REC
“ BUTTON (7)
DIRECTLY.
2) THE LCD DISPLAY WILL SHOW “
“ OR “
“ & “
“ AND FLASHING, AND THE SYSTEM IS
STARTING THE ENCODING MODE AFTER FEW SECONDS,.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB.
4) AFTER FINISH OF RECODING, PRESS AND HOLD THE “
REC
“ BUTTON (7) UNTIL THE LCD STOP
FLASHING AND RETURN TO “ PHONO “ MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
-
THE RECORDING FORMAT IS PRESET AT – MP3
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE “ RECORD “ BUTTON AGAIN DURING RECORD MODE.
E-3
