www.PyleUSA.com
www.PyleUSA.com
OPERATION ON AC POWER
Plug one end of provided AC cord into the AC input jack on the left side
of the amplifier. Then plug the other end of AC cord into AC power outlet. Turn
on the unit using the power/volume switch.
NOTE:
To avoid damaging your unit, make sure AC power is same as that
marked near AC input jack)
OPERATION ON DC POWER
This unit can be powered also using external 12V DC power. Connect external
12V DC power to DC input jack on the front of the amplifier. Observe the
correct polarity as following.
OPERATION ON RECHARGEABLE BATTERY
This unit can be powered internally using the built-in rechargeable battery.
When AC power is connected, if battery charging indicator lights red, the
rechargeable battery is not fully charged and will be allowed to charge while
the unit is powered by the AC power. (
Note:
Turning off the unit power switch
will allow the battery to recharge more quickly.) If the battery charging indica-
tor lights green, the battery is fully charged and ready to power the unit alone.
Shut off the power switch and disconnect the AC power. Turn the unit back on
and the rechargeable battery will power the unit alone.
OPERATION ON 'D' BATTERIES
This unit can also be powered internally with (6) x 'D' Batteries. Insert the
batteries while observing the correct polarity as marked. For longest operation
use only alkaline or rechargeable batteries. Replace the batteries when the
output volume drops or the range of the wireless decreases.
Note:
This unit does not recharge batteries. When using 'D' Batteries, do not
connect AC or DC power.
3
4
CONNECTION
•
The
KEYBOARD IN
socket can be connected to a electronics device.
•
The
CASSETTE IN
socket can be connected to a cassette player or other
audio player.
•
The
REC OUT
socket can be connected to a recording device or to the input
jack of a power amplifier to further amplify and enlarge the audio power.
•
The
MIC IN
socket can be connected to wired dynamic MIC. Keep MIC head
away from the speaker of main unit to avoid feedback.
BLUETOOTH/MP3 OPERATION
1. Insert flash drive into USB port or Micro SD Memory Card into Micro SD
card slot, system will play the music in flash drive or Micro SD Card
automatically. If both flash drive and Micro SD Memory Card are inserted,
system will play the music in flash drive. To play music in Micro SD Memory
Card press MODE button to switch to SD mode.
2. To play music from your mobile phone etc via bluetooth, press MODE button
to switch to BT mode. Turn on bluetooth function of your mobile phone and
search for Pyle Audio and connect. Then you can play your music in mobile
phone.
ATTENTION
1. If feedback (howling sound) occurs, try first turning down the treble control.
If feedback still is present, try turning down the volume or repositioning this
unit with respect to the wired or wireless microphone being used.
2. Extend the antenna fully whenever using the wireless microphone to ensure
optimum performance and maximum range.
BELT PACK TRANSMITTER OPERATION
Parts Description
1. Power On/Off/Mute switch
2. MIC input socket
3. Power/low battery Indicator
4. Gain adjustment
5. Battery compartment/cover
6. Lapel MIC
7. Headset MIC
5
4
1 2 3
6
7
