�j
!!l-u
Ill'
a
U
",!!l
!!!.-u
ti
�
i\j
�
,
....
PYD2300U
Channel Input Selector
Lets
you choose the input source to play
for
each channel.
Channel Gain Controls
lets
you adjust the gain
of each
input
source.
MIC
I
Combo Input Jack
For connecting a balanced
or
unbalanced low impedance microphone
with XLR-type or
1/4"
plug.
Channel CUE Switch
Allows you to monitor
the
selected audio
Input source and prepare It prior to mixing
it in.
CH5 Input Selector for LINE 8lUSB
Allows you to choose the
USB
connection
to play at CH5.
Power Switch
Power off the mixer before making any
connections.
MIC
I
Level Control
Dual
VU
Meter
lets
you control the MIC lavel
as
they
-
Pft2 PRO' -
Indicates the levels
of Lsft and
Right
enter the mix.
@
_.rl'TTI1_.
-hmi_.
rl'TTi1_,
_.nTJI)_
Master Channels.
MIC
I
Tone Controls
ParmH
adjustment
of the
high and low
of MIC
1
signal.
3·Band Equalizer
Allows you to tailor the mixer output
to suit your taste or perfonnance
environment.
Each
frequency range can be cut or
boost by up to
1Od8.
MIC Talkover Sw�ch
Allows you to lower
the
lavel or the
input sources so you can talk them
using the
OJ
MIC.
Crossfader Slider Control
Master Balance Control
Master Level Control
Lets
you control mixer's overall volume
level.
Booth
Lavel Control
Leta
you control mixer's overall
BOOTH
volume level. If you
set
up remote speaker
or
OJ
booth monitors.
Headphone Level Control
Headphone Jack
Accepts headphones with
114"
plug.
Channel Assign Switch
Lets
you select the Input source to be
Allows you to smoothly switch between
Allow fingertip control
of
all sound
Headphone CUElPGM Control
Allows you to listen simultaneously
or
separately to the CUE material or the
active
program.
mixed by
the
Croasfade Slider Control.
the input sources assigned to channel
mixing and fading.
A
and Channel
B, it is
replaceable.
USB OPERATION:
The input selection at CH5 allows you to choose the USB connection to play at CH5.
ON PC
I.Turn on the computer and PYD2300U
2.Connect USB cable from port of mixer to your computer.
3.The window will recognize the mixer as a "USB AUDIO DEVICE' or "USB AUDIO
CODEC", and install any required system components. automatically.
4.0pen the START menu and go to CONTROL PANEL, click on the SOUND AND
AUDIO DEVICES ICON, to change system audio preferences in Window.
5.Clip on the AUDIO tab, to access audio device settings.
6.Choose the USB AUDIO CODEC as a DEFAULT DEVICE.
7.Click on APPLY and you are ready to use the PYD2300U with your PC.
ON MAC
1.Turn on the computer and PYD2300U
2.Connect USB cable from port of mixer to your computer.
3.0pen SYSTEM PREFERENCES under APPLE menu.
4.Choose the SOUND icon in SYSTEM PREFERENCES.
5.Choose the OUTPUT tab in the SOUND window.
6.Select USB AUDION CODEC under CHOOSE A DEVICE
FOR SOUND OUTPUT.
7.Repeat the procedure for the INPUT tab and you are ready
to use PYD2300U with your MAC.
l
I»
B'
i
I
g
a
iii
••
