Pyle WEATHERSKIMASTER Instruction Manual Download

Page: 8 / 16

m/h

Flashing

Ski Mode

Slope Setting

slope angle

Ski Function ON

Sensitivity Setting

Ascending Sensitivity

Descending Sensitivity

Fast

Normal

Slow

Ski Mode

Ski Function ON

Ski Function

ON/OFF

Slope

Setting

Ascending

Sensitive

Setting

Descending

Sensitive

Setting

[M]

Hold

[M]

Hold

[M]

Ski Mode Setting Sequence

Ski Lap 3

Ski Record 1

Ski Lap 2

Ski Lap 1

meter

200

400

600

800

i la

p 1

i la

p 3

An Example to Illustrate Ski Log Function

Assume a user enjoyed three ski runs within a day as it
is outlined by the adjacent diagram. To enjoy the Ski
Log function, the user needs to turn ON the Ski
Function before the ski runs.

The Watch will log the below ski data into Ski Logbook
automatically, and these ski data can be reviewed in
Ski Recall Mode later.

Ski

Ski Lap (ski data)

NOTE

:*These maximum speeds are dummy figures,

the maximum speed can be logged in a real case only.

Record (the info and summary of all ski laps)

The record date = 11 June.

The record started time = AM10:00 00.

The total travel time = 5: 00 00.

The total number of ski lap recorded = 3 ski laps.

The total descent time = 0:15 00.

The accumulative descent = 1200m.

The accumulative ascent = 1200m.

The maximum descent speed = 15 Km/h*.

The highest altitude reached = 700 m.

The lowest altitude reached = 200 m.

The slope of the ski course = 35

The lap started time = AM 11:00 00 (Lap 1), AM

12:00 00 (lap 2 ), PM 2:00 00 (Lap 3).

The total descent time = 0:05 00 (Lap 1), 0:05 00

(Lap 2), 0:05 00 (Lap 3).

The maximum descent speed = 9 Km/h* (Lap 1),

11 Km/h* (Lap 2), 15 Km/h* (Lap 3).

The average descent speed = 6 Km/h (Lap 1), 8

Km/h (Lap 2), 10 Km/h (Lap 3).

The highest altitude reached = 500 m (Lap 1), 600

m (Lap 2), 700 m (Lap 3).

The lowest altitude reached = 200 m (Lap 1),

200 m (Lap 2), 200 m (Lap 3).

The altitude change = 300 m (Lap 1), 400 m (Lap

2), 500 m (Lap 3).

The descent altitude change graph for every lap.

9.4 Ski Mode -

Ski Log Function

AM 11:00

AM 1 :

2 00

PM :

2 00

AM 1 :

1 05

AM 1 :

2 05

PM :

2 05

Turn ON the
ski function
at point (a)
on 11 Jun,
AM 10:00

Turn OFF

ski function

at point (m)

n 11 Jun,

M :00

Ski Record 1

Ski Lap 1

200

400

600

800

i la

p 1

How to Log a Ski Lap

When the Ski Function is turned ON:

The Watch will create a Ski Record to log the
starting time and date into the Ski Logbook.

When  a  ski  run  is  started  subsequently,  the
Watch  will  create  a  Ski  Lap  automatically  or
manually  to  log  the  ski  data  into  the  Ski
Logbook.

How to Activate a Ski Lap Automatically

To start a Ski Run: When a ski run is started and a
significant altitude loss is detected, the decent
time timer will start counting automatically, and a
new ski lap is created .

To stop a Ski Run: When a ski run is stopped and
the altitude loss is not significant, the decent time
timer will stop counting automatically, and the
current ski lap is saved.

How to Activate a Ski Lap Manually

Press the [M] button once in the Ski Mode to
select

'MANUAL'

Display, then the Watch is ready

for manual start/stop a ski lap.

To  start  a  Ski  Run:  Press  the  [S/S]  button  once
and  start  the  ski  run  at  the  same  time,  then  the
decent  time  timer  will  start  counting  from  0
seconds, and a new ski lap is created.

To stop a Ski Run: Press the [S/S] button once
again when the ski run is stopped, then the decent
time timer will stop counting, and the current ski
lap is saved.

Slope Setting

The  slope  setting  is  the  setting  that  inputs  the
slope  angle  of  the  ski  field  into  the  Watch.
Most  of  the  ski  fields  post  that  figure  to  skier  on
the  ski  field.

Sensitivity Setting

The  Watch  will  activate  the  ski  lap  function
(start  the  descent  timer  and  create  a  ski  lap)
automatically  when  a  ski  run  is  started  (a
significant  altitude  loss  is  detected).

Sensitivity setting is the setting that adjusts the
accuracy for above auto-activation.

Type of Sensitivity

Ascending sensitivity setting: Adjust the
sensitivity for altitude ascend auto-activation.

Descending sensitivity setting: Adjust the
sensitivity for altitude descend auto-activation.

Level of Sensitivity

Fast  Sensitivity:  If  sometimes  false  auto-
activation  is  observed,  select  this  setting  to
improve  the  performance.

Normal Sensitivity: If the auto-activation is
functioned normally, keep this setting.

Slow  Sensitivity:  If  the  auto-activation  can  not
be  functioned,  select  this  setting  to  improve
the  performance.

How to Set the Slop and Sensitivity

The Watch will

also exit the setting display if NO key-stoke has
been activated for 1 minute.

To  select  the  setting  display,  hold  the  [M]  button
for  about  2  seconds  in  Ski  Mode,  then  the
flashing  "

SET

" icon will appear.

In setting display, press the [M] button to
change the selection following the adjacent
diagram.

When the

'ON'

'OFF'

is flashing, hold

down the [S/S] button for about 2 seconds will
turn ON (

'ON'

is flashing) or OFF (

'OFF'

flashing) the Ski Function.

When  Slope  angle  is  flashing,  press  the  [S/S]
or  [L/R]  button  to  increase  /  decrease  the
angle.  (Hold  down  the  button  change  the
angle  at  a  higher  speed).

When  the  'rAtE  AS'  (Ascending  sensitive  rate)
appear,  press  the  [S/S]  or  [L/R]  button  to
change  the  setting  among

'FAST'

(Fast),

'SLOW'

(Slow) and

'NORM'

(Normal)

When  the  'rAtE  DS'  (Descending  sensitive
rate)  appear,  press  the  [S/S]  or  [L/R]  button  to
change  the  setting  among

'FAST'

(Fast),

'SLOW'

(Slow) and