11
1.5.
Specifications
Table 1-1: CLT-351R/L Specifications
Feature
Specification
Camera Interface
Camera Link
TM
Spec “base” configuration
Camera Connector
26-pin MDR type
Frame Grabber Interface
AIA digital interface standard
- “R” version = RS-422
- “L” version = LVDS (EIA-644)
Frame Grabber Connector
68-pin HD type (SCSI-3)
Frequency Range
20 - 66 MHz (“L” version)
20 - 32 MHz (“R” version)
Mode Selection
Rear-panel 8-position DIP switch
Chipset National
Semi.
DS90CR286A
Power Supply
External 6 VDC Wall Transformer
Power Jack
2.1 x 5.5 mm, center-positive
Power Requirements
- “R” version = 1100 mA at 6 VDC (typical)
- “L” version = 400 mA at 6 VDC (typical)
Cabinet Dimensions
5.28” (L) x 1.12” (H) x 6.13” (D)
Weight 14
oz
Operating Temperature Range
0 to 50° C
Storage Temperature Range
-25 to 75° C
Relative Humidity
0 to 90%, non-condensing
Summary of Contents for CAMERA LINKT CLT-351L
