13
SprayMaster® System User Manual | www.PyranhaInc.com | Houston, Texas
Winterizing Your SprayMaster® System
1. Disconnect the nozzle tubing at the discharge elbow (liquid will pour from the tubing)
and open the bleed valve at the other end. We recommend having both ends of the
tubing empty into the drum.
Be sure the brass nut and ferrule on the nozzle tubing
stay in place.
2. Lift or move the lid to raise the intake filter out of the liquid. Flip the toggle switch to
“TEST”
and let run for fifteen (15) seconds to purge any liquid in the equipment (liquid
will spray from the discharge elbow). Flip the toggle switch to
“OFF.”
Unplug the sys-
tem from the power source.
3. Allow the nozzle tubing to drain for sever
minutes to empty as much liquid as possi-
ble. Be sure the intake filter stays out of any
liquid remaining in the drum.
4. If the drum freezes during the winter,
you will need to stir any contents before
reusing.
Re-connecting the SprayMaster®
System after Winterizing
1. After stirring the contents of the barrel,
reattach the nozzle tubing to the system
by pushing the tubing into the discharge
elbow and tightening with the nut and
ferrule.
2. Follow steps 5 through 9 under
“Servicing
Your SprayMaster® System”
on page 12.
YOUR TRUSTED LEADER IN
INSECT CONTROL®
SINCE 1972
SprayMaster®
Winterizing Your System
System_Manual_2020.indd 13
System_Manual_2020.indd 13
12/23/20 10:18 AM
12/23/20 10:18 AM
