5
SprayMaster® System User Manual | www.PyranhaInc.com | Houston, Texas
YOUR TRUSTED LEADER IN
INSECT CONTROL®
SINCE 1972
SprayMaster®
System Top Installation
1. Cut out or peel off tape covering large holes on lid.
2. Unlatch metal ring and slide it down
so it remains around the drum.
3. Remove drum lid
The following steps can be completed
with the drum top resting on the lip
of the drum, or on any support that
allows access to the bottom of the
drum lid.
4. Carefully drop float through top of
matching large hole. Make sure float
line isn’t pinched between the drum
lid and system disk.
5. Insert supplied bolts through the
bolt holes near the edges of the
plastic disk and secure to the drum
top. Tighten by hand to hold system
disk in place and then use wrenches
to finish tightening. *Don’t over
tighten as the plastic system disk
can crack.
6. Check float line again to make sure
it is not pinched and hangs free.
The latch on the metal ring can be locked in place for security
to keep the drum from being opened.
System_Manual_2020.indd 5
System_Manual_2020.indd 5
12/23/20 10:18 AM
12/23/20 10:18 AM
