ASSEMBLING HAND MIXER
ASSEMBLING HAND MIXER WITH STAND
Before fitting or removing the accessories (beaters, dough hooks) on the appliance,
make
sure the appliance is not plugged in and the speed switch (3) is in the «0» position.
1.
Insert the beaters (6) or the dough hooks (5) into the mixer body (1) (A).
2.
Ensure that the accessories are locked in the correct position. (B).
3.
To remove the accessories, press the accessories release button (4).
Before fitting or removing the accessories (beaters, dough hooks) on the appliance,
make
sure the appliance is not plugged in and the speed switch (3) is in the «0» position.
1.
Assemble the hand mixer (see section «Assembling hand mixer»).
2.
Press the head lift button (9) and lift the mixer head until it locks into the upper position (C, D).
3.
Place the bowl (8) on the mixer base.
4.
Press the head lift button (9) and lower the mixer head until it locks into the lower position (E).
5.
Place the hand mixer on the stand head and press down until it clicks into place (F, G).