background image

[ Table 2-1 : Technical Specifications (Germany) ]

Safety

 I

 06

General Data

AC connection type
Nominal apparent power
Nominal AC voltage
Nominal frequency
AC Nominal Active Power / Max
Max. back-up port output short-circuit fault current (A)

Single phase
3000 VA
230 VAC
50 Hz
3000 W / 4600 W (10 min)
125 A, 4.384 ms

Back-up Output

Features

European efficiency
Max. efficiency
Protective Device
DC disconnection device for PV
Ground-fault monitoring / grid monitoring

95.5 %
96.2 %

Yes
Yes / Yes

Display
Communication
Energy management system
Certificates and approvals

Touch TFT LCD “4.95” inch
LAN (Modbus TCP / IP), RS485, CAN
Integrated

Island protection

Shifting the frequency of the INVERTER away from nominal
conditions in the absence of a reference frequency.
(Frequency shift)

Dimensions (W x H x D, mm)

Weight

Protective class (I, II, III)
Degree of protection
Max. permissible value for relative humidity 
Operating temperature

Suggested operating temperature
Storage temperature
INVERTER topology
Noise emission
Intend to use
Wet condition
Pollution degree
Maximum altitude rating

467.6 x 721.6 x 212.5 (INVERTER)
467.6 x 721.6 x 212.5 (Battery)
31.28 kg (INVERTER)
52.26 kg (4 kWh)   /   59.36 kg (6.3 kWh)
Class I
IP 65 (Both)
4 % to 100 % (Condensing)
-20 - +50 °C
+0 - +40 °C (4kWh)  /  -10 - +40 °C (6.3 kWh)
+0 - +40 °C 
-20 - +60 °C (Both)
Non-Isolated
≤ 40 dB(A) @ 1m
Outdoor
Yes
3
< 2000 m

INVERTER (Derates > 40°C)
Battery (Derates outside these temperatures)

Efficiency (PV to Grid)

Rated / Maximum input apparent power
Rated / Maximum input active power
Rated input voltage
Rated / Maximum continuous input current
Rated input frequency
Max. grid port input short-circuit fault current (A)

3000 / 4000 VA
3000 / 4600 W
230 Va.c.
13/25 Aa.c.
50 Hz
56.5 A (191.048 ms)

Grid Input

IEC 62109-1/2, VDE-AR-N 4105:2018,
EN 61000-6-2/3, EN 61000-3-11/12 (INVERTER)
IEC 62619, IEC 62477-1, EN 61000-6-2/3 (Battery)

Summary of Contents for Q.HOME+ ESS HYB-G2





























































Reviews: