B01P
BAT1 CHG
OC P
BAT1 Charge Over
Current Protection
The product stops the generating process
because a significant protection event has
occurred. Wait until the event message
disappears. After the event message is
removed, it automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant event.
6.8.2 Battery General Events (Protection)
Type : PROTECTION
WEB Display
HMI Display
Description
Measures
B02P
BAT1 DCHG
OC P
BAT1 Discharge Over
Current Protection
The product stops the generating process
because a significant protection event has
occurred. Wait until the event message
disappears. After the event message is
removed, it automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant event.
B03P
BAT1 CEL V
HOLD P
BAT1 Cell Voltage
Sensing Data Hold
Protection
Power reset of the system is required.
If the symptom still occurs after reset, repair
of BMS or PCS Control Board is necessary.
B04P
BAT1 CEL
OV P
BAT1 Cell or Rack
Over Voltage
Protection
When the maximum cell or rack voltage is
above protection level, thus terminating the
system.
Automatically returns to normal when the
maximum cell or rack voltage goes below
the limit value.
B05P
BAT1 CEL
UV P
BAT1 Cell or Rack
Under Voltage
Protection
When the minimum cell or rack voltage is
below protection level, thus terminating the
system.
Automatically returns to normal when the
minimum cell or rack voltage goes above
the limit value.
B06P
BAT1 CEL
OT P
BAT1 Cell Over
Temp Protection
When the maximum cell temperature is
above protection level, thus terminating the
system.
Automatically returns to normal when the
maximum cell temperature goes below
the limit value.
Message Description
I
44
Summary of Contents for Q.HOME+ ESS HYB-G2
Page 2: ......
